EBox-RIODistributed I/O Control Module

EBox-RIO-E is a series of network interface I/O control module, each with 20 or 32 I/O EBox-RIO-E monitoring points. EBox-RIO-E based on different models, configure different digital or analog input or output combinations.

Users can according to different application needs, to find the most suitable products.

Using standard Modbus communication protocol to transmit information between remote host or device. Modbus-TCP is mainly applied to a standard 100Mbps network interface, Modbus-RTU is applied on the two RS-485 ports on EBox-RIO-E. Through TCP/IP and RS-485 to meet the needs of the majority of remote monitoring.

EBox-RIO is a series of RS-485 communication interface I/O control module, each EBox-RIO I/O module has 20 monitoring points.

EBox-RIO based on different models, Configure different digital or analog input or output combinations. Users can according to different application needs, to find the most suitable products.

EBox-RIO using standard Modbus-RTU communication protocol to transmit information between remote host or device.

LLD series of features in the flexible expansion. With Digital Input/Output, Analog Input/Output and other commonly used control and measurement interface.

Users according to their application needs, select 1 to 5 different functions of the expansion module. It can provide up to 20 control points, easy to get the multi combination control interface.

RS-485, GPIO reserved expansion interface, can be expanded according to the needs of work. The control module can be installed on the common standard guide rails in the industrial field through a special carrier.